DDM Garage Doors Blog - Page 22 of 24 -

Garage Door Spring Safety–Use the Spring King Winding Kit To Enable a Safe Garage Door Spring Installation

Saturday, July 24th, 2010 at 10:42 am by Dan Musick

We regret to inform you that this piece of hardware is no longer available. However, for alternative winding systems, see our blogs about the S3 Arrow Tru-Line Winder and the DDM Torsion Spring Safe-T-Winder.

If you already have a Spring King winding system, you can visit our blog post about winding Spring King and Simple Set winding systems.…

Read the rest of this entry »

EPA Lead (RRP) Training Class–Compliance Required

Thursday, July 22nd, 2010 at 12:45 pm by Dan Musick
An image of the US Environmetnal Protection Agency that requires Lead RRP Training.

Attention: All Contractors. It is a requirement for construction firms that work in pre-1978 homes to receive the EPA Lead RRP training certification. If you know someone that must receive the training but has not done so, please pass this information along to them so that they are not subject to monetary fines per day.…

Read the rest of this entry »

Weatherstripping For Clopay Garage Doors

Thursday, July 8th, 2010 at 2:15 pm by Dan Musick
A Clopay garage door bottom seal.
Clopay seal

Update: weatherstripping items for Clopay doors can now be found on our Clopay Garage Door Parts page.


DDM Garage Doors has the following weatherstripping items for your Clopay garage door. Get your door to seal right.…

Read the rest of this entry »

Special: Garage Door Parts Page Opening At DDM

Monday, July 5th, 2010 at 10:01 am by Dan Musick
A person's hand attempting to ring a old fashion door bell pertaining to the launch of DDM's garage door parts page.

Garage door parts ordering at DDM is about to get even better.

We get extra items, which will go on sale in a discount page featuring overstocks, good used parts, etc. Therefore, consistent with our recent steps to help the customer with costs, we’re introducing a page where customers can get good deals and save money on garage door parts.…

Read the rest of this entry »

Extension Spring Safety Cables–Garage Door Springs Innovations Part 4

Tuesday, June 29th, 2010 at 8:04 pm by Dan Musick
A Cable Assembled 1/8" for 7' Extension Spring Door.

Garage door extension springs, though not containing the massive energy stored in garage door torsion springs, are still dangerous. You want as much on your side as possible when opening and closing the door on a daily basis. This is why we recommend extension spring safety cables.…

Read the rest of this entry »

Save Money When Ordering Garage Door Parts Part 1

Wednesday, June 23rd, 2010 at 3:08 pm by Dan Musick
A person holding money showing how much can possibly be saved by purchasing garage door springs from DDM Garage Doors.

From time to time, DDM Garage Doors hits upon ways to assist our customers with cost savings when they order garage door springs or other parts. One such experience came recently when one of our customers ordered springs. We had him consider converting from longer 1 3/4″ springs to shorter 2″ springs while maintaining mechanical integrity. …

Read the rest of this entry »

Garage Door Springs Innovations 3: Extension Spring Stretching

Wednesday, June 23rd, 2010 at 2:02 pm by Dan Musick

Installing Clopay extension springs has become easier with the Ideal/Clopay EZ-SET winding unit. It wraps the cable around a spool to stretch the spring. Sometimes installers open the door all the way and then attach the extension springs – a dangerous move.…

Read the rest of this entry »

Garage Door Springs–Innovations Part 2: Safety

Friday, June 18th, 2010 at 7:56 pm by Dan Musick
The TorqueMaster garage door spring.

Three main products in the area of garage door spring safety have been introduced in the last 20 years:

Wayne Dalton TorqueMaster springs (shown installed above) wind with a drill. The TorqueMaster is the first system to offer a counter balance spring sealed inside the garage door tube for safety.…

Read the rest of this entry »

Garage Door Springs Innovations I: Galvanized and Coated

Saturday, June 5th, 2010 at 2:20 pm by Dan Musick

About 20 years ago, galvanized garage door torsion springs broke into the garage door parts market as an alternative to oil-tempered springs. Later, electro-coating on oil-tempered torsion springs augmented the buyer’s set of choices.

Because traditional oil-tempered garage door torsion springs have an oily residue owing to their oil-enabled manufacture, installers often leave dirty smudges from the springs on the doors, to the ire of the customer.…

Read the rest of this entry »

La Grou Distribution Trusts DDM

Tuesday, April 27th, 2010 at 7:27 pm by Dan Musick
A La Grou Distribution's semi-trailer docked outside there warehouse facility.

DDM Garage Doors recognizes and appreciates La Grou Distribution for its business and loyalty over the years.

Chicagoland warehousing and distribution services from La Grou roll on since 1964. Notable among La Grou’s logistics prowess is many years of helping facilitate the summer favorite, “Taste of Chicago,” which sees millions of visitors annually from the US and even abroad.…

Read the rest of this entry »

Since 1997 the Gold Standard for Online Garage Door Parts

CUSTOMER SUPPORT HELP WANTED

Huge inventory of torsion springs for same or next day shipping! Here you will find all you need in the most common sizes of 1 3/4," 2," 2 1/4," and 2 5/8" inside diameter springs. Larger 3 3/4" and 6" inside diameter commercial and industrial springs may require a day or two to ship. You'll also find TorqueMaster Springs, Extension Springs, Self-Storage door springs, steel rolling door springs and springs for one piece single panel doors.

Shelves packed with every part you need to fix your doors.

Please note. Shipping times and costs have changed. Normal transit times are currently not guaranteed, even on next day and second day shipments. Shipping prices on items over eight feet have more than tripled.