Posted July 6th, 2018 at 12:14 pm by Dan Musick
Before you replace the garage door cables on your door, make sure that you follow all safety precautions to prevent accidents from occurring. For additional information, view our tutorial titled Cable Installation.
- Secure the garage door in the open position.
- Then, unplug the opener power cord.
- Remove the cable from the bottom fixture and drum.
- Afterward, turn the shaft if the cable is too tight.
- Insert the end of the cable and wrap the cable around the drum.
- Connect the bottom loop of the cable to the bottom fixture pin, turning the shaft as needed.
- Remove the tools that support the door and plug in the power for the opener.
For more information, watch our YouTube video titled How to Replace Your Garage Door Cables.
This entry was filed under Technical Support. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.
Leave a Reply