Posted February 24th, 2011 at 5:05 pm by Dan Musick
Does your door operate with the Wayne Dalton TorqueMaster Spring system? I am pleased to announce that you can now order these directly from the Wayne Dalton TorqueMaster Torsion Springs page–with prices worth checking out!
TorqueMaster springs sell very well, and we wanted to streamline the ordering system to make them ready for our shopping cart. This means a call/fax/email is not always necessary if you need these springs. Be sure about your door measurements, enter the data in the required fields, and pull up your spring or springs.
You’ll have a choice when you order:
Round with a counter wheel and spring you wind with a drill: TorqueMaster One.
Hexagon with a ratchet mechanism to help wind with a wrench: TorqueMaster Plus.
See the linkable example for each of the above, and check the appropriate radio button. Now you can add the TorqueMaster springs to your cart!
This entry was filed under About DDM, News. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.
Leave a Reply