2" Horizontal Track w/ 12" Radius, .075, w/ Angle For 7' Door, Pair

Garage Door Tracks 2" Horizontal with 12" radius with .075 gauge steel for 7' high doors.
Includes curved tracks, horizontal tracks, angles, nuts and bolts.
The curved and straight parts are shipped in separate boxes and one may be delayed.
Completely compatible with the lighter .055 or .075 gauge tracks, but are heavier duty. They do not bend or wear as easily.
Tracks come disassembled due to shipping restrictions, requires assembly.
Note: Garage door parts are designated left or right by the side on which they are viewed from inside the garage looking out.
IMPORTANT: When ordering horizontal tracks be sure to verify the track radius. If you order tracks with the incorrect radius the radius will not be returnable because the cut of each radius is unique to the straight track and angle.
If you are installing new tracks on a door, you can follow this general rule for selecting the horizontal track radius. For 12" radius tracks you will need 12" of headroom, the distance from the top of the door to the lowest part of the ceiling. For 15" radius tracks you will need 15" of headroom. If you have a drawbar opener you may need up to two additional inches of headroom for either track radius.
IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.