WD Conversion Kit for 1 Spring - 12" Radius Tracks, Twist Type
CWD-CNV-ST12
$149.63
per set
Product Description
Wayne Dalton Garage Door conversion kit for doors with single spring on right side and with tracks that twist. 12" track radius.
You will need the newer style flangles in order for the bottom of the winder to lock into the square flag angle hole unless you drill new holes in the older style glag angles.
These lock into to the interlocking tabs of the flagangles.
Kit includes:. 1 Pair of cable drums with cables. 1 Right side hex winding cone. If this kit is ordered with a spring, the right wind cone will be installed in the spring. 1 Right winding bracket. 1 Plastic support bracket for the left side (clips into the drum and gets bolted to the flag bracket).
1 Pair of 18 1/2" flagangles for 12" radius curved track (see link below on to how measure track radius) and TorqueMaster Plus / Type II systems. The tracks twist onto the interlocking tabs of the flagangles.
If you have the older TorqueMaster spring with a black plastic winding cone, the new TorqueMaster Plus cone will not fit in the spring. You will need to replace the spring as well, with the newer style spring that has a hex cone.
For more information on Winders, view our Torsion Spring Winding Systems blog.
For a picture and instruction on how to determine the raduis size of your curved track, click on this DIY tuturial link and reference image 2.2.
Note: Garage door parts are designated left or right by the side on which they are viewed from inside the garage looking out.
IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.
You will need the newer style flangles in order for the bottom of the winder to lock into the square flag angle hole unless you drill new holes in the older style glag angles.
These lock into to the interlocking tabs of the flagangles.
Kit includes:. 1 Pair of cable drums with cables. 1 Right side hex winding cone. If this kit is ordered with a spring, the right wind cone will be installed in the spring. 1 Right winding bracket. 1 Plastic support bracket for the left side (clips into the drum and gets bolted to the flag bracket).
1 Pair of 18 1/2" flagangles for 12" radius curved track (see link below on to how measure track radius) and TorqueMaster Plus / Type II systems. The tracks twist onto the interlocking tabs of the flagangles.
If you have the older TorqueMaster spring with a black plastic winding cone, the new TorqueMaster Plus cone will not fit in the spring. You will need to replace the spring as well, with the newer style spring that has a hex cone.
For more information on Winders, view our Torsion Spring Winding Systems blog.
For a picture and instruction on how to determine the raduis size of your curved track, click on this DIY tuturial link and reference image 2.2.
Note: Garage door parts are designated left or right by the side on which they are viewed from inside the garage looking out.
IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.
Quantity Discounts
2+: $149.63 per set4+: $149.63 per set
8+: $149.63 per set
