WD Conversion Kit for 2 Springs - 15" Radius Tracks, Twist Type
CWD-CNV-DT15
$143.43
per set
Product Description
Wayne Dalton Garage Door conversion kit for doors with two springs and with tracks that twist onto the interlocking tabs of the flagangles. 15" track radius.
You will need the newer style flangles in order for the bottom of the winder to lock into the square flag angle hole unless you drill new holes in the older style glag angles.
Kit includes:. 1 Pair of cable drums with cables. 1 Pair of hex winding cones. If this kit is ordered with springs, the winding cones will be installed in the springs. 1 Right winding bracket. 1 Left winding bracket. 1 Pair of 20 3/8" flagangles for 15" radius curved track (see link below on to how measure track radius) and TorqueMaster Plus / Type II systems. The tracks twist onto the interlocking tabs of the flagangles.
If you have the older TorqueMaster springs with black plastic winding cones, the new TorqueMaster Plus cones will not fit in the springs. You will need to replace the springs as well, with the newer style springs that have hex cones.
For more information on Winders, view our Torsion Spring Winding Systems blog.
For a picture and instruction on how to determine the raduis size of your curved track, click on this DIY tuturial link and reference image 2.2.
Note: Garage door parts are designated left or right by the side on which they are viewed from inside the garage looking out.
IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.
You will need the newer style flangles in order for the bottom of the winder to lock into the square flag angle hole unless you drill new holes in the older style glag angles.
Kit includes:. 1 Pair of cable drums with cables. 1 Pair of hex winding cones. If this kit is ordered with springs, the winding cones will be installed in the springs. 1 Right winding bracket. 1 Left winding bracket. 1 Pair of 20 3/8" flagangles for 15" radius curved track (see link below on to how measure track radius) and TorqueMaster Plus / Type II systems. The tracks twist onto the interlocking tabs of the flagangles.
If you have the older TorqueMaster springs with black plastic winding cones, the new TorqueMaster Plus cones will not fit in the springs. You will need to replace the springs as well, with the newer style springs that have hex cones.
For more information on Winders, view our Torsion Spring Winding Systems blog.
For a picture and instruction on how to determine the raduis size of your curved track, click on this DIY tuturial link and reference image 2.2.
Note: Garage door parts are designated left or right by the side on which they are viewed from inside the garage looking out.
IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.
Quantity Discounts
2+: $143.43 per set4+: $143.43 per set
8+: $143.43 per set
