Garage Door Springs Replacement - DDM Garage Doors Blog

The garage door torsion spring replacement is dangerous! Therefore, before you start to replace them, make sure that you follow all safety precautions to prevent accidents from occurring. More information on how to replace your garage door torsion springs is available on the DDM Garage Doors YouTube video titled by the same name.

1. Measure to make sure you have the right replacement springs.
2. Unwind the unbroken spring or springs.
3. Then, remove the two center bolts.
4. Mark and loosen the set screws on the cable drums.
5. Slide the torsion shaft to the left and right to remove the old springs and install the new springs.
6. Secure the springs and cable drums, and tighten both cables.
7. Finally, wind both springs.

In addition, view our tutoral How to Replace Garage Door Torsion Springs for more detailed step-by-step instructions. With this information, your replacement of the garage door springs will hopefully be both safe and successful.

This entry was filed under Technical Support. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.