Standard Torsion Springs for Clopay Garage Doors

To purchase torsion springs that are torqued with a Clopay winder visit our springs page for Clopay, Ideal and Holmes EZ-Set Springs. To purchase extension springs that stretch above the tracks as the door closes visit our springs page for Clopay, Ideal and Holmes Extension Springs.

You'll find helpful instructions on our tutorial for replacing garage door torsion springs.

If you know the model number of your garage door, and if your door is 16' wide and 7' high, you can order springs from our Torsion Springs for EZ-Set Systems page.

To purchase standard garage door torsion springs that work with standard Clopay hardware, click the Clopay part number or description below. You will be taken to the shopping cart of our standard torsion springs page where you can follow the links for paying for the parts. Please note: As you look at the door from inside the garage, the spring to the left of the center support bracket is normally right wind, and the spring on the right side is a left wind spring.

Clopay Torsion Spring Part Numbers & Descriptions

Unmatched Support. The Right Part. DIY with Confidence!