PowerMaster SGI-71 Industrial Slide Gate Operator 3/4 HP, 115V 1PH

OCOM-SGI-71-PM
$5,680.13 each

Product Description

PowerMaster SGI-71 Industrial Slide Gate Operator 3/4 HP, 115V 1PH
PowerMaster Model SGI Slide Gate Operator is designed for use in Commercial, Industrial and Restricted Access applications for gates up to 80’ wide and 2,000 lbs.
  • Use for up to 45 cycles per hour.
  • Class II low voltage control circuit.
  • Maximum gate weight: 2000 LBS.
  • Maximum cycles per hour: 45 CPH.
  • Maximum gate width: 80 feet.
  • Gate speed: 9 inches per second.
  • UL 325 Listed for use in Class I through IV application.
  • Solid state control board with diagnostic LEDs to indicate all input and output functions.
  • Timer to close with 0-60 sec.
  • Adjustment standard.
  • *Longer timer available upon request.
  • Maximum run timer for equipment protection (self-adjusting).
  • Master/Slave option with dedicated terminal connection provided.
  • Easy Left/Right changeover.
  • Time delay on reverse to ensure smooth gate motion and less stress on equipment.
  • Spike suppressing circuitry for surge and lightning protection.
  • Emergency control enabling circuitry for safety with security.
  • Electrical dynamic brake for precise gate positioning.
  • Magnetic gate lock control circuitry with 115 Volt output terminals.
  • Integral, current sensing, anti-entrapment circuitry with independent opening and closing sensitivity adjustment.
  • External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors.
  • 1/2 HP, 115 Volt AC, 6 Amp, 1 Phase, instant reversing, switchless, PSC motor, with thermal overload protection and high speed ball bearings for smooth, quiet operation.
  • Internal On/Off power switch.
  • Two grounded 115 Volt AC, 15 Amp.
  • Convenience receptacles.
  • NEMA 1 three-button control station included.
  • Heavy duty #10 Ga.
  • Galvanized steel frame providing a strong and durable unit.
  • Hard shell, baked-on, weather resistant powder coating.
  • 40:1, oil bath type, gear reducer for long service and smooth, quiet operation.
  • Heavy duty, #50 drive chain with a spring loaded tensioning system for smooth starts, stops and reversals.
  • Heavy duty, pillow block type ball bearings supporting output drive shaft and enabling extended endurance under heavy loads with low maintenance.
  • Padlockable drive disconnect with brass slide for manual operation in case of power failure.
  • Positive chain driven rotary limit switches for precision gate positioning.
  • Settings are never affected by manual operation.
  • Post or pad-mountable for strong, solid installation.
    External control input terminal connections for: Radio Receiver, Push Button Control Station, Key Switches, Loop Detectors, Card Key Readers, Telephone Entry Systems, Etc.

    Note: Over the Road freight charges apply.

  • IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.
  • Quantity Discounts

    2+: $5,680.13 each
    4+: $5,680.13 each
    8+: $5,680.13 each

    Purchase

    We are either "OUT OF" this part because it is currently unavailable, or the part is "NLA" - No Longer Available. Please contact us regarding future availability or possible substitutes for items that are no longer available.

    Unmatched Support. The Right Part. DIY with Confidence!

    CUSTOMER SUPPORT HELP WANTED

    Huge inventory of parts and torsion springs for same or next day shipping! Here you will find all you need in the most common sizes of 1 3/4," 2," 2 1/4," and 2 5/8" inside diameter springs. Please contact us for specialty springs such as TorqueMaster, EZ Set, self-Storage, and steel rolling door springs as many of these have been subject to supply chain shortages. Larger 3 3/4" commercial and industrial springs may require an week to ship; other springs may require three to four weeks to process.

    COVID update. No mask, no service! When picking up parts please wear a mask. We'll gladly provide one. Please honor the six foot social distancing rule. Thank you for your patience and understanding.

    Shipping times and costs have changed. Normal transit times are currently not guaranteed, even on next day and second day shipments. Shipping prices on items over eight feet have more than tripled.