PowerMaster SG-54 Commercial Slide Gate Operator 1/2 HP, 230/460V 3PH

$3,197.34 each

Product Description

PowerMaster SG-54 Commercial Slide Gate Operator 1/2 HP, 230/460V 3PH
PowerMaster SG Slide Gate Operator for use in Commercial and Industrial Applications for gates up to 50’ wide and 1,500 lbs.
  • Use for up to 30 cycles per hour.
  • Maximum gate weight: 1500 lbs.
  • Maximum cycles per hour: 30 CPH.
  • Maximum gate width: 50 feet.
  • Gate speed: 9 inches per second.
  • Class II low voltage control circuit.
  • UL 325 Listed for use in Class I through IV application.
  • Shipping weight: approx.
  • 235 lbs.
  • Shipping dimensions: 33″ x 17″ x 20″.
  • Nitro board with 4-line LCD Display.
  • Timer to close with 0-60 sec.
  • Adjustment standard.
  • Longer timer available upon request.
  • Maximum run timer for equipment protection (self-adjusting).
  • Master/Slave option with dedicated terminal connection provided.
  • Easy Left/Right changeover.
  • Time delay on reverse to ensure smooth gate motion and less stress on equipment.
  • Spike suppressing circuitry for surge and lightning protection.
  • Emergency control enabling circuitry for safety with security.
  • Electrical dynamic or solenoid brake for precise gate positioning.
  • Magnetic gate lock circuitry with control relay.
  • Integral, speed sensing, anti-entrapment circuitry with independent opening and closing sensitivity adjustment.
  • External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors.
  • Internal On/Off power switch.
  • NEMA 1 three-button control station included.
  • Selectable three second advanced audio warning signal Heavy duty #11 Ga.
  • Galvanized steel frame providing a strong and durable unit.
  • 40:1, oil bath type, gear reducer for long service and smooth, quiet operation.
  • Heavy duty #50 drive chain with a spring loaded tensioning system for smooth starts, stops, and reversals.
  • Heavy duty pillow block type ball bearings supporting output drive shaft and enabling extended endurance under heavy loads with low maintenance.
  • Padlockable drive disconnect with brass slide for manual operation in case of power failure.
  • Positive chain driven rotary limit switches for precision gate positioning.
  • Settings are never affected by manual operation.
  • Post or pad mountable for easy installation.
External control input terminal connections for:
  • Radio Receiver.
  • Push Button Control Station.
  • Key Switches.
  • Loop Detectors.
  • Card Key Readers.
  • Telephone Entry Systems, Etc.
Note: Over the Road freight charges apply.

Quantity Discounts

2+: $3,133.39 each
4+: $3,069.45 each
8+: $2,984.18 each


At this time, this item cannot be ordered online. Please contact us to order.

Unmatched Support. The Right Part. DIY with Confidence!

YES, WE'RE OPEN FOR BUSINESS! DDM is considered a life-sustaining company because we are an internet retail company that provides essential products. Due to the recent outbreak of Coronavirus, however, we are changing our local order pickup policy at our West Chicago location. To pick up an order you will need to order first. The quickest way is to order in advance through our online shopping cart. There you can select the local pickup option. Or, you can call 630-293-1337 for assistance, to confirm availability of parts, and to place your order. Once ordered, your parts will be available for pickup in the lobby of our north side front entrance. Longer items will be picked up on the south side loading dock. Please honor the six foot social distancing rule. Thank you for your patience and understanding as we all navigate this challenge together. More information is available on our blog titled DDM Adjusts to the COVID-19 Coronavirus. In the same article you will also find documentation and an answer to the question: "Is a garage door repair company a life sustaining business?"