PowerMaster MSW Medium Duty Swing Gate Operator 1/2HP, 115V 1PH
The PowerMaster Model MSW Operator controls industrial vehicular swinging gates up to 800 pounds, with a maximum width of 16 feet.
- Class II low voltage control circuit.
- Gate Capacity: 800 lbs, 16 ft wide, up to 24 cycles per hour.
- Travel Speed: 12 seconds from open to close.
- UL 325 Listed for use in Class I through IV application.
- Nitro board with LCD display.
- Timer to close with 0-60 sec.
- Adjustment standard (Longer timer available upon request).
- Maximum run timer for equipment protection (self-adjusting).
- Dual gate option with a dedicated terminal connection provided.
- Easy Left/Right changeover.
- Time delay on the reverse to ensure smooth gate motion and less stress on equipment.
- Spike suppressing circuitry for the surge and lightning protection.
- Electrical dynamic brake for precise gate positioning.
- Integral current sensing anti-entrapment circuitry with independent opening and closing sensitivity adjustment.
- External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors.
- Internal On/Off power switch.
- Heavy duty #13 Ga.
- Galvanized steel frame provides a strong and durable unit.
- Hard shell, baked-on, weather resistant powder coating.
- Industrial V-belt primary reduction for smooth quiet operation.
- Heavy duty 30:1 oil bath type gear reducer for long service and dependable operation.
- #41 Sprocket and roller chain arrangement for final drive reduction.
- Oil impregnated brass bearings supporting output drive shaft for dependable service with low maintenance.
- Drive arm easily disconnected for manual operation in case of a power failure.
- Easy adjustable limit switch cams for precision gate positioning.
- Soft start and soft stop.
External control input terminal connections for: Radio Receiver, Push Button Control Station, Key Switches, Loop Detectors, Card Key Readers, Telephone Entry Systems, Etc..
Note: Over the Road freight charges apply.
IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.