PowerMaster CSWI-154 Industrial Swing Gate Operator 1-1/2 HP, 3PH

OCOM-CSWI-154-PM
$8,545.05 each

Product Description

PowerMaster CSWI-154 Industrial Swing Gate Operator 1-1/2 HP, 3PH
The CSWI Operator is designed for use on industrial vehicular swinging gates in high traffic applications.
  • Ideal for commercial properties.
  • Nitro board with 4-line LCD screen.
  • Class II low voltage control circuit.
  • Gate Capacity: 1800 lbs, 30 ft wide, up to 45 cycles per hour.
  • Travel speed: 18 seconds to full open or full close.
  • UL 325 Listed for use in Class I through IV application.
  • Timer to close with 0-60 sec.
  • Adjustment standard.
  • Longer timer available upon request.
  • Maximum run timer for equipment protection (self-adjusting).
  • Master/Slave option with dedicated terminal connection provided.
  • Easy Left/Right changeover.
  • Time delay on reverse to ensure smooth gate motion and less stress on equipment.
  • Spike suppressing circuitry for surge and lightning protection.
  • Emergency control enabling circuitry for safety with security.
  • Electrical dynamic brake for precise gate positioning.
  • Integral current sensing anti-entrapment circuitry with independent opening and closing sensitivity adjustment.
  • External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors.
  • 1/2 HP., 115 Volt AC, 6 Amp., 1 Phase, instant reversing, switchless, PSC motor, with thermal overload protection and high speed ball bearings for smooth, quiet operation.
  • Internal On/Off power switch.
  • Two grounded 115 Volt AC, 15 Amp.
  • Convenience receptacles.
  • NEMA 1 three-button control station included.
  • Heavy duty #7 Ga.
  • Steel frame providing a strong and durable unit.
  • Hard shell, baked-on, weather resistant powder coating.
  • Timing belt primary reduction for smooth, quiet and positive operation.
  • Heavy duty 60:1, oil bath type gear reducer for long service and dependable operation.
  • Heavy duty #50 sprocket and roller chain arrangement for final drive reduction.
  • Heavy duty pillow block type ball bearings supporting output drive shaft and enabling extended endurance under heavy loads with low maintenance.
  • Drive arm easily disconnected for manual operation in case of power failure.
  • Easily adjustable limit switch cams for precision gate positioning.
  • Pad mounted for a strong, solid installation.

External control input terminal connections for: Radio Receiver, Push Button Control Station, Key Switches, Loop Detectors, Card Key Readers, Telephone Entry Systems, Etc.

Note: Over the Road freight charges apply.
IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.

Quantity Discounts

2+: $8,545.05 each
4+: $8,545.05 each
8+: $8,545.05 each

Purchase

We're sorry, but this item does not qualify for regular shipping. For help completing your order, please contact us.

Since 1997 the Gold Standard for Online Garage Door Parts

CUSTOMER SUPPORT HELP WANTED

Huge inventory of torsion springs for same or next day shipping! Here you will find all you need in the most common sizes of 1 3/4," 2," 2 1/4," and 2 5/8" inside diameter springs. Larger 3 3/4" and 6" inside diameter commercial and industrial springs may require a day or two to ship. You'll also find TorqueMaster Springs, Extension Springs, Self-Storage door springs, steel rolling door springs and springs for one piece single panel doors.

Shelves packed with every part you need to fix your doors.

Please note. Shipping times and costs have changed. Normal transit times are currently not guaranteed, even on next day and second day shipments. Shipping prices on items over eight feet have more than tripled.