Commercial Torsion Spring Prices
WARNING! Replacing torsion springs is dangerous work, even for experienced tradesmen! Springs are normally under extreme tension. Damage to property and loss of fingers, limbs and life can occur without following proper procedures or without using the right tools. DDM Garage Doors wants your business, but not at the expense of your safety. If you have any doubts about your ability to perform the work safely, we recommend you hire a professional to do the work.
Before ordering your springs, be sure you have measured them correctly.
The following links may also be helpful:- Residential and Light Commercial Torsion Spring Replacement Instructions
- Commercial and Industrial Torsion Spring Replacement Instructions
- Garage Door Torsion Springs & Prices
- Richard Kinch's Page
Additionally, in recent months, there has been a rising concern about the type of steel used in springs. For example, Chinese imported steel and springs are of a lower quality, and therefore much more brittle than other sources. At DDM Garage Doors, we make it our primary concern to not only help people figure out how to repair their garage doors, but also to provide excellent products for our customers. Therefore, if you purchase a spring from us, you can rest assured that all our springs are made with steel from the United States, thereby guaranteeing a higher quality than our competitors.
Volume Discounts:
Spring discounts are based on the total weight of the spring order.
Prices listed are for torsion spring orders under 250 pounds.
For orders that weigh between 250 and 500 pounds, deduct 5%.
For orders that weigh between 500 and 750 pounds, deduct 10%.
For orders that weigh between 750 and 1,000 pounds, deduct 15%.
For orders that weigh between 1,000 and 2,000 pounds, deduct 20%.
For orders that weigh between 2,000 and 3,000 pounds, deduct 25%.
If you are looking for torsion spring hardware, see our torsion spring hardware prices.
Select the inside diameter of the spring you need.
